Best Craftsman 3 Hp Edger Carburetor

The ROP Shop | Carburetor Compatible with Tecumseh – Includes both the carburetor and a new mounting gasket.

This ROP Shop carburetor served as a direct replacement for an older Tecumseh engine on a tiller. The installation was straightforward, and it came with the necessary gasket, which was convenient. After installation and some minor adjustments to the idle screw, the engine started up and ran smoothly, resolving the previous running issues.

The most critical step is ensuring compatibility before ordering. As the seller states, you must carefully check your engine’s model, spec, and OEM part number against the product details. Taking a few extra minutes to verify these numbers can prevent the headache of receiving the wrong part.

Also, be mindful of the fuel requirement; it is not designed for fuel with more than 10% ethanol, which is standard for most small engines but worth noting. Overall, it’s a functional replacement part that performs as expected, provided you do your homework on fitment.

AISEN Carburetor for Craftsman 3.5HP 536.772101 Se – Direct fit for the specified engine models.

I purchased this for an older Craftsman 3.5HP edger (model 536.772101) that had become difficult to start and would not run smoothly. The part was a direct replacement for the original Tecumseh carburetor. Installation was quite simple, taking about 20 minutes, and all the linkage and fuel line connections aligned perfectly without any modifications needed.

After installing, the edger started on the second pull and now runs consistently without surging or stalling, which is a massive improvement. The build quality appears solid and comparable to the original unit it replaced. For the price, it’s an excellent solution that saved me from either a costly professional repair or having to replace the entire machine.

It effectively brought my old equipment back to life, and I’m very satisfied with the performance so far. It has been a practical and efficient fix for my engine troubles.

For Craftsman 536.772100 3.5HP 9 for edger Carburetor – Direct OEM replacement fit for edger model 536.772100.

I purchased this carburetor to replace the original on my 3.5HP edger, which was having trouble starting and maintaining a steady idle. The installation was straightforward, as it’s a direct-fit replacement for the 536.772100 part. All the linkages and fuel line connections matched up perfectly without any need for modifications.

After installation, the engine fired up on the second pull and now runs smoothly. The RPM is consistent during use, and the throttle response feels just like it did when the machine was new. It effectively resolved the surging and stalling issues I was experiencing.

This part seems to be a well-made, functional replacement that successfully restores the engine’s air-fuel mixture control for reliable operation. For a specific repair like this, it gets the job done without any fuss, providing a solid and affordable fix to extend the life of older equipment.

Carburetor Fit Craftsman 3.5HP 536.772101 536.7723 – Cost-effective solution for engine problems.

This is a straightforward, no-frills replacement carburetor kit. The package arrived with the carburetor and a new gasket, which was convenient as it saved me from having to source one separately. The installation process was relatively simple, serving as a direct replacement for the original part on my equipment.

After installing and making some minor idle adjustments, the engine started up much more easily and now runs significantly smoother than it did with the old, worn-out carburetor. The build quality seems adequate for an aftermarket part at this price point. It effectively solved the sputtering and stalling issues I was experiencing.

However, it’s absolutely crucial for potential buyers to meticulously check their engine’s model number to ensure compatibility, as fitment is key for these components. For a basic repair, it performs its function as expected and gets the machine running again.

Panari 632795A Carburetor for Craftsman Eager 1 La – Comes as a complete kit with gasket, fuel filter, and spark plug.

I used this carburetor kit for an older snowblower with a 5HP Tecumseh engine that had been sitting for a while. The installation process was quite simple, and it was a direct bolt-on replacement for the original part. I was particularly impressed that the kit included a new gasket, fuel filter, and spark plug, which saved me the time and expense of buying them separately.

After installing it, the engine fired up after just a few pulls and idled smoothly without needing immediate adjustments. While it’s marketed as ‘ready to use,’ keep in mind that slight fine-tuning might be necessary depending on your specific engine’s condition and altitude. For the price, this is a comprehensive and effective repair kit that offers solid value for anyone looking to revive their small engine equipment.

AISEN Carburetor for Craftsman 536.772101 536.7723 – Extensive compatibility with numerous older Craftsman, Sears, and Tecumseh models.

This replacement carburetor is designed for a wide range of older Sears, Craftsman, and Tecumseh-powered lawn equipment, including specific edgers and mowers. Based on the extensive list of compatible model numbers, it serves as a direct-fit part for bringing old engines back to life. Installation is generally straightforward for those with some mechanical experience, potentially resolving common issues like difficulty starting, stalling, or rough idling.

For many, this is a much more economical option than sourcing an original OEM part or paying for a professional repair service. It is crucial for buyers to meticulously match their engine’s model number with the provided list to ensure proper fitment. Potential buyers should also verify if the unit comes with necessary gaskets and fuel lines, as these are often required for a complete and leak-free installation.

Overall, it’s a practical component for a DIY engine tune-up.

Carburetor For Craftsman Edger Model 536.772210 536772210 with 3.8 HP Engine – Direct-fit replacement for model 536.772210.

I purchased this carburetor for an older edger, model 536.772210, which was having trouble starting and maintaining a steady idle. The installation was relatively straightforward, as the unit was a direct match for the original part, with all the linkage points and fuel inlets in the correct locations. After installing it and adding fresh fuel, the engine started on the second pull and ran noticeably smoother than before.

The throttle response is now consistent, and the engine no longer sputters or stalls under load. This replacement part successfully restored the edger’s performance to its original state, regulating the fuel-air mixture as expected. It’s a practical and cost-effective solution for anyone with this specific edger model who is experiencing fuel system issues.

It effectively brought an old but reliable piece of equipment back to life without the high cost of professional repair.

TOPREPAIR Carburetor for Craftsman 536.77230100 4h – Complete kit includes carb, filters, and spark plug.

This carburetor kit was a comprehensive solution for my old Craftsman edger that was having trouble starting and running smoothly. The package included everything needed for a full tune-up, not just the carburetor, which was a pleasant surprise. The parts appeared to be of decent quality for an aftermarket kit.

Installation was relatively straightforward, taking about 30 minutes for someone with basic mechanical experience, although there were no instructions included. After installing the new carburetor, fuel line, and filters, the engine started on the second pull and ran much better than it has in years. I did need to make a small adjustment to the idle screw to get it running perfectly, which is to be expected.

Overall, it’s a great value and a practical way to extend the life of older lawn equipment without spending a fortune on OEM parts or professional repairs. Be sure to verify your engine model number before ordering.

Carburetor For Craftsman Edger Model 536.772210 536772210 with 3.8 HP Engine – Direct fit for model 536.772210 with a 3.8 HP engine.

I purchased this carburetor for my edger, model 536.772210, which had been running rough and was difficult to start. As a direct replacement part, the installation was straightforward. The results were noticeable almost immediately.

The 3.8 HP engine now starts reliably and idles smoothly without the previous sputtering issues. During use, the throttle response is much more consistent, and the edger maintains steady power, allowing for cleaner cuts along the lawn. It appears to have restored the original fuel flow efficiency by providing a balanced air-fuel mixture, just as the description suggests.

This component effectively addressed the performance problems my equipment was having, making it a solid choice for anyone looking to repair their specific edger model. It performs its function well, leading to smoother and more reliable operation for regular yard work. It has brought new life to an older piece of equipment.

TOPREPAIR Carburetor for Tecumseh 143.013802 Sears – Complete kit with all necessary tune-up parts included.

This carburetor kit is a comprehensive package for overhauling the fuel system on various Tecumseh-powered small engines. The inclusion of not just the carburetor but also a gasket, fuel line, clamps, fuel filter, spark plug, and air filter makes it a convenient, all-in-one solution. Installation was straightforward, fitting my older Craftsman edger without any modifications.

After installing the new components and making minor adjustments to the idle screws, the engine started up much more easily and now runs consistently without stalling. The build quality appears decent for an aftermarket part, and all the included accessories fit as expected. For those looking to revive aging yard equipment, this kit provides excellent value and helps solve common running issues caused by a faulty or clogged carburetor.

It’s a practical and affordable repair option before considering a full equipment replacement.