Best Gravely Zt Hd 52 Price

HD Switch 10 AMP Upgrade Blade Clutch PTO Switch f – Extensive compatibility with a wide range of mower models.

I purchased this HD Switch for my zero-turn mower and it served as a direct replacement. The installation was fairly simple, fitting into the existing slot without any need for modifications. Once connected, it worked immediately and restored full functionality to my mower’s ignition system.

The build quality feels adequate for its purpose, comparable to the original part it replaced. The most crucial step for any potential buyer is to meticulously check your mower’s model and serial number against the extensive compatibility list. It can be daunting, but confirming the exact match is essential to ensure you get the right component.

For those who have verified the fit, this switch is a functional and effective solution to get your equipment operational again. It performs its intended function without issue and appears to be a reliable alternative to a more expensive OEM part.

79108500 Trailer Hitch kit – Solid 1/4-inch steel construction offers good durability.

This trailer hitch kit is a functional accessory designed for specific Gravely and Ariens zero-turn mowers, aiming to add light-duty towing capabilities. The kit arrives with the hitch, a mounting plate, and all the required nuts and bolts. Installation is quite straightforward, as it’s designed to use the mower’s existing mounting points, and it can typically be attached in about 10-15 minutes with standard tools.

The construction feels solid, featuring 1/4-inch thick steel with a protective coating to guard against rust from outdoor exposure. With a stated traction capacity of up to 500 pounds, it’s more than adequate for pulling a small utility cart, a leaf trailer, or a lawn aerator. While not intended for heavy agricultural work, it effectively enhances the versatility of a zero-turn mower for property maintenance, making it a useful addition for homeowners with larger yards.

8TEN Double V-Belt for Ariens Gravely ZT HD 60 52 – Direct replacement for OEM part 07200026

This is a replacement deck belt designed for specific Ariens and Gravely zero-turn mowers with 52-inch decks. I found that it fit my Gravely ZT52HD perfectly, with the dimensions (122″ length by 5/8″ width) matching the OEM specifications precisely. The installation process was as expected for a deck belt change; no unusual difficulties were encountered.

It’s crucial for any potential buyer to double-check their mower’s model number and the required OEM part number (07200026) to ensure compatibility, as fitment is very specific. The belt engaged the pulleys correctly and the mower deck operated smoothly after installation. While initial performance is good, the true test will be its durability over a full mowing season.

So far, it appears to be a solid, standard replacement part that does its job as intended, offering a viable alternative to the original manufacturer’s belt.

Gravely 71515300 Zero-Turn Mower Equipment Cover P – Guaranteed OEM fit ensures perfect coverage for compatible Gravely mowers.

I purchased this OEM Gravely cover for my zero-turn with a 60″ deck, and it performs as expected. Being an official manufacturer part, the primary advantage is the fit, which is precise and tailored to the machine’s contours, unlike many universal covers that can be baggy or too tight. The material feels durable and adequately thick to provide solid protection against rain, sun fading, dust, and other outdoor elements.

It’s easy to put on and take off, and the elasticized hem helps keep it secure around the base of the mower in moderate weather. While it’s a fairly basic design without extra features like air vents or numerous tie-down straps, it effectively fulfills its core purpose of protecting the investment you’ve made in your mower. It’s a functional, well-made cover that offers peace of mind through its guaranteed compatibility and solid construction.

Keycci 00450300 Lawn Mower Blades Compatible with Gravely 52″ Deck – Extensive compatibility with numerous mower brands and models.

This is a set of three 52-inch high-lift replacement blades designed for a wide array of mowers, including various Gravely, Ariens, and other popular models. The construction feels solid, made from steel with a protective coating. The blades are designed for efficient side discharge and bagging, which is typical for a high-lift style.

They fit as expected after I carefully cross-referenced the part numbers and measured my old blades. The listed dimensions (18-1/10″ length, 2.5″ width, 0.64″ center hole) are critical, and potential buyers should absolutely confirm these specs before ordering to avoid any fitment issues. The performance is on par with standard replacement blades, providing a clean cut on my lawn.

Overall, they serve as a capable aftermarket alternative to the original manufacturer’s parts, offering a functional and seemingly durable option for routine mower maintenance and blade replacement.

MowerPartsGroup (3) Reaper 52″ HD Toothed Mulching – Heavy-duty construction with .240″ thickness.

I purchased this blade as a replacement for my 18-inch mower deck, and it has performed well so far. The first thing I noticed was the build quality; at .240″ thick, it feels very substantial and durable. Being made in the USA is a definite plus.

The 5/8″ center hole was an exact match, so installation was simple and required no modifications. Out of the box, the blade was reasonably well-balanced, leading to minimal vibration during operation. It provides a clean, even cut on standard lawn grass.

The red powder coating is a nice touch, making it easy to spot during cleaning and hopefully providing good rust resistance over time. It’s a straightforward, heavy-duty blade that does exactly what it’s supposed to do. If the specifications match your requirements, it’s a solid, no-frills option that gets the job done effectively and seems built to last.

Ariens Gravely HD 1/4″ Thick Hitch fits 71514900 for IKON-X 42″ 52″ 60″ – Heavy-duty 1/4″ steel construction with a protective powder coat finish.

This tow hitch kit is a functional and straightforward accessory for specific Ariens and Gravely zero-turn mowers. The construction feels solid, made from 1/4″ steel with a durable black powder coat finish that should hold up well against the elements. Installation is relatively simple as it comes with the necessary mounting hardware, which is a nice inclusion.

The design incorporates a standard hitch hole and a convenient slot for chains or ropes, adding to its versatility for light-duty yard work. The most critical factor for this product is compatibility. The seller provides an exhaustive list of model and serial numbers it fits—and ones it doesn’t.

It’s absolutely essential to double-check your mower’s specific information against these lists before ordering to ensure a proper fit. Overall, it serves its purpose well for towing a small cart, spreader, or other yard attachments.

Spring 08300711 ZT HD 44 ZT HD 48 ZT HD 52 Replace – Exact OEM or equivalent replacement.

This product is a specific replacement component, and its primary value lies in its part number. When you need a particular piece for a repair, having the exact part number is crucial, and this item delivered on that front. It arrived properly packaged and was clearly identifiable as part number 08300711.

The installation was straightforward because it was a direct, one-to-one replacement for the original component, fitting perfectly without any need for modification. It successfully resolved the issue I was having with my equipment. While not a glamorous purchase, it’s a functional necessity.

Potential buyers should be absolutely certain this is the exact part number they require, as compatibility is key. I recommend cross-referencing with your device’s service manual before purchasing to ensure a successful repair and avoid any hassle with returns.

STORIBADGE 09689700 Gravely Shock Damper Apex Zenith 48 52 60 SD RD CE Compatible with ARIENS ZT HD 60 – Direct OEM-equivalent fit for specified models.

I purchased this component for my Gravely mower after the original part failed. The most critical aspect for a replacement part is compatibility, and the part number 09689700 was an exact match for what I needed. The product description’s extensive list of compatible models provided confidence before ordering.

Upon arrival, the part felt well-made and was visually identical to the factory original. Installation was straightforward because it’s a direct-fit replacement, requiring no special tools or modifications to get it into place. Once installed, my mower was back in full working order and has been running smoothly since.

For anyone needing this specific part, it serves its purpose perfectly, offering a reliable solution to get your equipment back in service without any hassle. Just be sure to verify this is the exact part number your mower’s manual specifies.

8TEN Blade Spindle Deck Kit for Ariens Gravely Iko – Complete kit includes both blades and spindles for a full deck refresh.

This replacement kit, which includes both blades and spindles, is designed for specific 52-inch Ariens and Gravely zero-turn mowers. The inclusion of both components makes it a convenient option for a complete mower deck overhaul. The provided specifications are quite detailed, with blade dimensions like an 18-inch length and a 5/8-inch center hole, which is helpful for verifying a correct fit before purchase.

The compatibility list is also extensive, referencing specific models and OEM part numbers, which significantly reduces the guesswork. For a user comfortable with performing their own maintenance, this kit appears to be a practical, all-in-one solution to restore the mower’s cutting system. The build quality seems standard for aftermarket parts, aiming to provide performance comparable to the original equipment.

It’s a straightforward replacement for worn or damaged deck components, offering a functional and economical alternative to sourcing individual OEM parts for a rebuild.